Whether you have a shiny new model or an old trusty version, your washing machine will inevitably experience problems at some point. One of the most annoying is certainly a noisy spin cycle. Troubleshoot your GE washer loud when spinning issue with this guide.

How to Troubleshoot a
GE Washer Loud When Spinning

If you notice your GE washer loud when spinning, there are several different failed parts that could be the cause. *Always remember to disconnect the power to your washer and be cautious of sharp objects when troubleshooting yourself.

#1 – Defective Tub Bearing

The washing machine tub bearing keeps the inner tub spinning smoothly and quietly. The tub bearing can become damaged over time, especially if you tend to overload your washer with too much clothing, or if you use low-grade detergents on a regular basis.

Mounted in the center of the outer tub, a damaged bearing can cause a terrible screeching or grinding noise during the spin cycle. You’ll know it when you hear it! The part can be replaced, but it’s usually best to let a professional washer repair technician handle the job.

ge washing machine screeching

Photo Credit: Parts Select

#2 – Failed Motor Coupling

When the motor coupling fails, it too can lead to a GE washer loud when spinning issue. The motor coupling connects the drive motor and the transmission. It is designed to fail when the washer is overloaded, preventing the drive motor and transmission from breaking, which would be a much bigger hassle.

If you continue to use the washer when the motor coupling has failed, you’ll hear that tell-tale noise during the spin cycle. The motor coupling is located on the drive motor, underneath the tub. As this is a more complex part to access, it is recommended to hire a washer repair person.

#3 – Damaged Drive Pulley

The drive pully makes the wash tub spin. It is basically a metal wheel with a belt that goes around the drive motor. As with any other part, the drive pulley can get worn out over time. This, in turn, can make your GE washer loud when spinning.

The drive pulley is located behind the back panel of your washer. Remove the belt and replace the worn out pulley with a new one, and then replace the back panel.

ge washer makes loud noise when spinning

Photo Credit: Parts Select

#4 – Worn Out Clutch Assembly

The washer’s clutch assembly engages the transmission with the inner tub during a spin cycle. It helps the tub spin at the proper speed. Continued overloading puts stress on the clutch assembly, leading to the GE washer loud when spinning problem.

Replace the worn out clutch assembly if needed when your washing machine makes loud noise when spinning. You’ll find the clutch assembly beneath the wash tub. Accessing it involves removing many different parts, so only tackle this if you’re confident with your handiwork.

This troubleshooting guide should help point you in the right direction if your GE washer spin cycle is loud.